You are reading the article Samsung Galaxy Grand 2 Twrp Recovery V220.127.116.11: Downloads And Guide updated in February 2024 on the website Flu.edu.vn. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 Samsung Galaxy Grand 2 Twrp Recovery V18.104.22.168: Downloads And Guide
Whether you are looking to flash a custom ROM, or root your device, TWRP recovery helps a lot. Today, the latest version of TWRP recovery for Galaxy Grand 2 was released, which we’re sharing with you here along with installation guide.
With Galaxy Grand 2 TWRP recovery, you also gain the ability to create full Nandroid backup of the device, which can be sued to retore the device back to current condition, even if you flash a wrong firmware or ROM on it.
Without a doubt, TWRP is an incredible tool, and completely worth it even if you have to break warranty of your device for it, which it does.
KNOX gets tripped when you install TWRP, so know that you won’t be able to use enterprise apps that require KNOX, mostly the apps from your own company where you may be working.
SAMSUNG GALAXY GRAND 2, model no. SM-7105
Don’t try this on Galaxy Grand 2 Duos, whose model no. is SM-7102
Don’t try on any other device whatsoever whose model no. is different than the one provided above!
Warning: Warranty may be void of your device if you follow the procedures given on this page. You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components. Also, this trips KNOX, meaning KNOX would stop working on your device, and thus you won’t be able to Samsung Pay, or install enterprise Apps on your device at Office.
Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files. Sometimes, Odin installation may delete everything on your device!
Step 1. Download Odin and TWRP recovery file from above.
Step 3. Extract the Odin file. You should get this file, Odin3 chúng tôi (other files could be hidden, hence not visible).
Disconnect your Galaxy Grand 2 from PC if it is connected.
Step 5. Boot Galaxy Grand 2 into download mode:
Power off your Galaxy Grand 2. Wait 6-7 seconds after screen goes off.
Press and hold the three buttons Power + Home + Volume down together until you see warning screen.
Press Volume Up to continue to download mode.
Step 7. Connect your Galaxy Grand 2 to PC now using USB cable. Odin should recognize your Galaxy Grand 2. It’s a must. When it recognizes, you will see Added!! message appearing in the Log box in bottom left, and the first box under ID:COM will also show a no. and turn its background blue. Look at the pic below.
You cannot proceed until you get the Added!! message, which confirms that Odin has recognized your device.
If you don’t get Added!! message, you need to install/re-install drivers again, and use the original cable that came with the device. Mostly, drivers are the problem (look at step 2 above).
If Odin gets stuck at setup connection, then you need to do this all again. Disconnect your device, close Odin, boot device into download mode again, open Odin, and then select the file and flash it again as said above.
→ That’s it. Enjoy TWRP recovery on your Galaxy Grand 2!
Root Galaxy Grand 2
Now, that you have the TWRP recovery, flash the SuperSU file now to see if you gain root access.
You're reading Samsung Galaxy Grand 2 Twrp Recovery V22.214.171.124: Downloads And Guide
Here is latest version of ClockworkMod Recovery for of Samsung Galaxy Grand Duos which not only brings new features but also fixes the in-compatibility bugs with KitKat ROMs.
You need the CWM recovery to be able to install custom ROMs, which helps you in updating to latest Android version available unofficially, and also get new and cool features for your phone.
As this is the latest version, you shouldn’t be getting that pesky ‘set metadata recursive’ error with this while flashing Android 4.4 base ROMs. This is version 126.96.36.199 of CWM recovery for Galaxy Grand Duos.
Warranty may be void of your device if you follow the procedures given on this page!
You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.
CHECK DEVICE MODEL NO.
To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be GT-I9082!
Please know that this page is meant only for Samsung Galaxy Grand Duos, model no. GT-I9082. Please DO NOT try the procedures given here on other of the Galaxy Grand: GT-I9080/I9080L.
BEFORE YOU BEGIN..
You must do this pre-installation stuff before attempting to install CWM on your Galaxy Grand Duos I9082 in order to avoid any complications later, and have a smooth and successful process.BACK UP YOUR DEVICE
Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on sd card, too.
For help on Backup and Restore, check out our exclusive page on that linked right below.
► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPSINSTALL GALAXY GRAND DUOS DRIVER
You must have proper and working driver installed on your windows computer to be able to successfully flash CWM on your Samsung Galaxy Grand Duos. In case you’re not sure, follow the link below for a definitive guide for installing driver for your Galaxy Grand Duos on your computer.
► SAMSUNG GALAXY GRAND DUOS DRIVERS INSTALLATION GUIDECHARGE YOUR DEVICES
If your android device, or PC, powers off due to lack of battery while the process is underway, it could damage the device. So, make sure both of them are adequately charged and that no power interruption takes place when the process is undergoing — at least 50% battery of the device and laptop is what we would recommend.OTHER THINGS TO TAKE CARE OF:
└ Use original USB cable to connect your phone to PC.
└ Do not use the procedures given below on Mac (using VMWare) as it works best on proper Windows PC only.
If you haven’t used Odin software to install a recovery on a Samsung galaxy device before, we suggest you first watch a video of that, given right below, to get familiar with the process.
Btw, the video below shows installing the the CWM recovery on Samsung Galaxy S3 (yes, not Grand Duos!), but as the process is exactly same, it doesn’t matter.
GUIDE: SAMSUNG GALAXY GRAND DUOS CWM RECOVERY
Download the files given below and save them in a separate folder on your computer (just to keep things tidy, that is).
Galaxy Grand Duos CWM (Non-touch) with Odin
Galaxy Grand Duos CWM (Touch) with Odin
Extract/Unzip the CWM file on your computer (using 7-zip free software, preferably). For touch, it is CWM-touch_i9082_chotu.tar and for non-touch, it is recovery_20131210.tar. You’ll get the following files:
recovery_20131210.tar (or) CWM-touch_i9082_chotu.tar
Disconnect the Galaxy Grand Duos from PC if it is connected.
Boot your Galaxy Grand Duos GT-I9082 into Download Mode (image below of Galaxy S4 should help):
Power off your phone first and wait for 6-7 seconds after display is off.
Press and hold these 3 buttons together until you see Warning! screen: Volume Down + Power + Home.
Press Volume Up now to continue to Download Mode.
If you don’t get the Added! message, here are some
Make sure you have installed driver for Galaxy Grand Duos as said above in ‘Before you begin..’ section.
If you have already installed driver, then uninstall them and reinstall back.
Connect using a different USB port on your PC.
Try a different USB cable. The original cable that came with your phone should work best, if not, try any other cable that’s new and of good quality.
Reboot phone and PC and then try again.
Load the recovery file (extracted in Step 1) into Odin as instructed below:
Now in the Option section of Odin, make sure that Re-Partition box is unchecked. (Auto Reboot and F. Reset Time boxes remain checked, while all other boxes remain unchecked.)
Double check the above two steps.
If you see FAIL message instead of the RESET in Odin’s top left box, that a problem. Try this now: disconnect your Galaxy Grand Duos from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.
Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your Galaxy Grand Duos from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.
It was easy, right? Let us know what you plan to do now, with latest cwm recovery installed.
Looking to install Android 4.4 KitKat maybe, eh?
Suggestions are most welcomed!
TWRP recovery is a blessed paradise for those who often deal with install custom ROMs on their devices using ClockworkMod recovery with the volume buttons (which is quite cumbersome), and is now available for the Samsung Galaxy S Plus I9001, thanks to XDA Senior Member dbx4.
TWRP recovery has a full touch interface and has a lot of unique features, some of which are mentioned below:
Graphical touchscreen interface with buttons and drag-to-scroll!
Compressed backups that can save you up to 50% disk space
Ability to choose which partitions to back up and which to restore
Install queues allow you to install multiple zips in one go (e.g. CM9 zip together with gapps zip)
Easy one-button cache & dalvik cache clearing after an installation
Recovery settings are saved to the sdcard and persist through reboots
File Manager that allows you to move, copy and delete files and change their permissions
Battery percentage indicator and clock (set your timezone in settings!)
TWRP recovery really is a must-have, specially for ROM flashing addicts as it makes the time spent in recovery mode much more intuitive. Read on to find out how to flash TWRP Recovery on the Galaxy S Plus I9001.
This recovery and the guide below are compatible only and only with the Samsung Galaxy S PLUS, model number i9001. It’s not compatible the GT-i9003, I9000 or with any other device and may render an incompatible device unusable. Check your device model in Settings » About phone.
The methods and procedures discussed here are considered risky and you should not attempt anything if you don’t know exactly what you are doing. If any damage occurs to your device, we won’t be held liable.
How to Install TWRP Recovery on Galaxy S Plus
Download the latest TWRP Recovery file from the official XDA page. Download the flashable image file version to get a .img file.
Extract the i9001_Quick_Flasher_v1.4.rar to a convenient location on your computer. Use a software like WinRAR or 7-zip to extract.
On the phone, enable USB Debugging from Settings » Applications » Development. Then, connect your phone to the computer.
After the phone reboots, TWRP recovery will be successfully installed on your Galaxy S Plus.
To try out TWRP recovery, first turn off the phone. Then, press and hold the Volume Up + Power buttons together, and let go of the buttons as soon as the Samsung logo shows up. Then, as soon as an icon showing “an Android in a box” comes up, press the Menu button (the button on the left of the center/home button) to enter recovery.
What to do if phone keeps booting into recovery after flashing
After flashing TWRP recovery, your phone might start booting into recovery every time you try to turn on the phone. If that happens with you, you can follow the steps below to solve the problem. If your phone boots up fine after flashing TWRP recovery, you DO NOT need to do this part.
Download the following files:
Boot_loader.tar (Do not extract this even if it shows up as a compressed/zip file)
Turn off your phone completely. Then, turn on the Galaxy S Plus in Download Mode — press and hold these keys together: Volume Down + Home + Power until a screen with an Android icon in yellow comes up.
In ODIN, do the following:
Now, connect the phone to the computer using your USB cable. You should get the message “Added!!” under Odin’s message box in the bottom left. If you don’t get this message, then probably there is a problem with drivers. Make sure you have proper drivers installed (check step 1 of the flashing procedure).
What to do if Odin gets stuck: If ODIN gets stuck at some stage and doesn’t seem to be doing anything, do this — disconnect the phone from the PC, close ODIN, remove battery, re-insert it, turn phone on in Download mode again, and do the procedure again from Step 7. Same if you get a FAIL message in Odin.
Your phone will no longer keep rebooting into recovery whenever you try to turn it on.
With, Moto G getting an official unlocking of bootloader and sources open to everyone, it was only a matter of time before it got the famed ClockworkMod Recovery. And here it is. Even at it’s early stage, it is fully functional with only bug left being incorrect date showing in backup file names. But that’s not much of a bug, right?
All credits for the original recovery file goes to a1Pha, the developer who compiled CWM Recovery for Moto G.
At the moment of writing this post, the latest version of CWM is 188.8.131.52 for the Moto G.
Warranty may be void of your device if you follow the procedures given on this page.
You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.
CHECK DEVICE MODEL NO.
To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be XT1033/XT1032!
This procedure here will work for both single-sim and dual-sim variants. Do not use the procedures discussed here on any device of Motorola or any other company. You have been warned!
BEFORE YOU BEGIN..
You must do this pre-installation stuff before attempting to install CWM recovery on your Moto G in order to avoid any complications later, and have a smooth and successful process.UNLOCK BOOTLOADER of MOTO G FIRST!
In order to install CWM recovery on Moto G, you need to unlock its bootloader first. If you have already done that, then skip this, otherwise follow the link below to see our guide on that. Tip: As unlocking the bootloader will delete everything on your phone — apps, files, etc. — be sure to create Backup of all things necessary before starting with bootloader unlock guide.
► MOTOROLA MOTO G BOOTLOADER UNLOCK GUIDEBACK UP YOUR DEVICE
Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.
For help on Backup and Restore, check out our exclusive page on that linked right below.
► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPSINSTALL MOTOROLA DEVICE MANAGER
You must have proper and working driver installed on your windows computer to be able to install recovery on your Motorola Moto G. In case you are not sure follow the instructions below.
► ADB AND FASTBOOT DRIVERS FOR MOTOROLA PHONES AND TABLETSCHARGE YOUR DEVICE
If your android device powers off due to lack of battery while the process is underway, it could damage the device.
So, make sure your device is adequately charged — at least 50% battery of the device.
GUIDE: MOTOROLA MOTO G CWM RECOVERY
DOWNLOADSCLOCKWORK MOD RECOVERY FILE
Prepare your phone:
Enable developer options: Go to your phone’s Settings » select About phone » Scroll to the bottom and tap on “Build number” seven times to enable developer options.
Enable USB Debugging: Open phone’s Settings » select Developer options » Tick the “USB debugging” checkbox (under Debugging section).
Extract the installer file motorola-moto-g-cwm.zip (using 7-zip, preferably). You’ll get the following files, and one folder:
That’s all! You have successfully flashed ClockworkMod Recovery on your Motorola Moto G.
If you are looking to root your Moto G, then we’ve two different Root methods ready for you. Try the superboot method first as it’s the easiest, and modified recovery method shall be your last resort to root as it tweaks the recovery in order to gain superuser access.
► ROOT MOTO G WITH ONE CLICK SUPERBOOT ROOT TOOL
► ROOT MOTO G WITH MODIFIED RECOVERY METHOD
It was easy to install CWM recovery your Motorola Moto G, right? Let us know and how you plan to use it further.
Your suggestions and queries, if any, are most welcomed.
Via XDA (a1Pha)
For installing custom ROMs and other such hacks and modifications on Android devices, a custom recovery is often required, and ClockworkMod (CWM) recovery has always been the most popular recovery available. However, CWM recovery’s origins stem from the time when one would have to use the hardware buttons on a device to navigate in recovery, making it extremely cumbersome for regular use.
And that’s where TWRP recovery came in. TWRP recovery features touch support, with proper graphical buttons for accessing various options, making it extremely popular for many devices for its ease of use as well as some useful functionality – fast backups, inbuilt file manager, themes support, and more – not found in CWM recovery, while also making installation of custom ROMs and mods a breeze thanks to the impressive touch-based GUI.
This all-in-one guide puts together everything that one would need to flash TWRP recovery on their Nexus S, along with step-by-step instructions of the entire procedure, so that you can start flashing custom ROMs and make other modifications on your device.
Installing TWRP recovery will void the phone’s warranty, and as install a custom recovery requires unlocking the bootloader on the phone, it will also wipe all the data on the phone and factory reset. However, by flashing a stock firmware image and recovery and re-locking the bootloader, warranty can be regained, and you’ll be able to back up and restore all data before and after flashing TWRP recovery.
Now let’s see how TWRP recovery can be installed on the Nexus S.
The procedure described below is only for the GSM variant of the Samsung Nexus S. Do not try it on the CDMA/4G Nexus S variants or any other device.
The methods and procedures discussed here are considered risky, so try them out at your own risk, and make sure to read each step carefully before attempting anything. We will not be held responsible if anything goes wrong.
Things you need:
NOTE: Backup is optional and you can skip this step if you do not wish to back up anything.
Unlock the bootloader on your Nexus S using this guide. Unlocking bootloader wipes all data from the phone so make sure you take a backup as mentioned in step 1.
NOTE: If you’ve already unlocked the bootloader on your device, you can skip this step.
Download and install the Android SDK → from here. This will install the necessary drivers for the phone on your computer.
NOTE: If you’ve already installed the SDK when unlocking the bootloader, skip this step.
On the phone, go into the Settings » Developer options menu and enable the USB Debugging option. On Android 2.3, this option can be found in Settings » Applications » Developer options.
Installation of TWRP Recovery
Extract the Fastboot.zip file on your computer to the C: drive to get a folder named Fastboot with four files inside it.
Copy the TWRP file that you downloaded to the Fastboot folder on drive C so that you now have a total of 5 files inside.
Turn off your phone. Then, boot into fastboot mode by holding down the Volume down + Volume Up + Power buttons together till the screen turns on and shows “Start” written in big green letters.
Then, connect your phone to the computer with your USB cable, then wait for Windows to finish installing the drivers (drivers will be installed only the first time you connect the phone to the computer). For reliability, ensure that you use a USB port at the back if you are using a desktop computer, as the front panel ports can be loose and cause problems.
Now, perform the following steps in the command prompt to flash TWRP.
Navigate to the Fastboot folder which you obtained in step 2. For example, if the Fastboot folder is in drive C on your computer, enter cd C:Fastboot in command prompt (and press Enter) to navigate to the folder.
Then, enter fastboot devices. If your Nexus S has been detected properly, you will see a device ID show up in command prompt. If nothing comes up, make sure you have installed the drivers, disconnect phone, remove and re-insert battery, and retry the procedure from step 5.
Now, flash TWRP recovery on the phone by entering fastboot flash recovery *filename*.img in the command prompt, where *filename* has to be replaced by the name of the recovery file that you have downloaded. For example: fastboot flash recovery openrecovery-twrp-184.108.40.206-crespo.img
After recovery is flashed, you will see an “OKAY”/”finished” message in the command prompt. The phone will also show “FASTBOOT STATUS – OKAY” at the bottom of the screen once recovery has been flashed.
Now, using the volume buttons on the phone, change “Start” to “Recovery mode“, then press the power button to boot into recovery. Once recovery boots up, select “Reboot” then select “System” to reboot the phone into Android.
TWRP recovery is now installed on your Nexus S. Make sure to read the “Booting into TWRP Recovery” section below to find out how you can boot into TWRP when needed.
Booting into TWRP Recovery
Whenever you want to use TWRP recovery, you can boot into it via Fastboot mode. The procedure to boot into TWRP recovery is given below.
Turn off the phone.
Then, boot into fastboot mode by holding down the Volume Up + Power buttons together till Fastboot Mode shows up on screen.
Press the volume down key till the “RECOVERY” text is selected in fastboot mode, then select it by pressing the power button. The phone will then reboot into TWRP recovery, where you can tap on options to select them.
2 to 3 inches
2.6-inch: 2011/2012 Galaxy Y Pro
: 2011 Galaxy M Pro (with QWERTY keyboard)
: 2012 Galaxy Pocket, 2011 Galaxy Pro (with QWERTY keyboard)
3 to 4 inches
3-inch: 2013 Galaxy Pocket Neo & Galaxy Star
: 2012 Galaxy Mini 2
: 2011 Galaxy Fit
3.5-inch: 2013 Galaxy Fame
4-inch: 2013 Galaxy Xcover 2
: 2011 Galaxy Player 4.0 (MP3 player)
: 2012 Galaxy Player 4.2 (MP3 player)
: 2011 Galaxy Z
: 2011 Galaxy R
4.3-inch: 2011 Galaxy S2
4.7-inch: 2013 Galaxy Win
In fact, instead of going for a mid-range Galaxy Win, you’d be better off looking for a Galaxy S3 deal. The best sold Android handset to date, the third Galaxy S model is already cheaper now that the Galaxy S4 is official. Those of you that don’t necessarily want the latest flagship model, could very well choose a 2012 Galaxy S3 instead of a newer, but not-so-stellar 2013 Galaxy mid-ranged device.
Galaxy S4 (left) vs Galaxy S3 (right)
Like the Galaxy S, Galaxy Nexus or Galaxy S2, the Galaxy S3 is very well known in the mobile universe and we won’t focus on it too much right now.
4.8-inch: Galaxy Camera (photo camera)
5 to 6 inches
: 2012 Galaxy Grand
: 2012 Galaxy Player 5 (MP3 player)
: 2011 Galaxy Note
5.5-inch: 2012 Galaxy Note 2
The Galaxy Note 2 is Samsung’s second “phablet,” a term coined by the media with the launch of the original 5-inch Galaxy Note back in September 2011. Meanwhile, smartphone screen size kept increasing, and we’ll talk about even bigger smartphones in a few moments.
Galaxy S4 (left) vs Galaxy Note 2 (right)
The Galaxy Note 2 is another Samsung flagship, although it never matched the Galaxy S3 sales because of its size. Nonetheless, the device brings a 5.5-inch Super AMOLED display with 1280 x 720 resolution, 1.6GHz quad-core Exynos 4412 Quad processor, 2GB of RAM, 16 to 64GB of storage, up to 64GB of microSD expansion, 8-megapixel camera, 1.9-megapixel front-facing camera, a 3100mAh battery and Android 4.1 Jelly Bean with TouchWiz features on top.
Additionally, the Galaxy Note 2 comes with an S Pen stylus and extra stylus-related software features.
A 5.9-inch Galaxy Note 3 is reportedly going to be launched later this year.
5.8-inch: 2013 Galaxy Mega 5.8
: 2012 Galaxy Player 5.8
6 to 7 inches
6.3-inch: 2013 Galaxy Mega 6.3
7-inch: 2010 Galaxy Tab
The Galaxy Tab was Samsung’s first tablet, a 7-inch device unveiled back at IFA 2010 (September) to take on the original iPad which had been launched in April of that year. The Galaxy Tab prompted the late Steve Jobs, Apple’s co-founder and CEO, to mock 7-inch tablets in a famous earnings conference call.
The Galaxy Tab did not become the iPad killer as Samsung may have wanted, but it certainly spurred a new Galaxy subfamily, the Tabs, that came in a variety of sizes in the following years.
Galaxy Tab 7 at IFA 2010
A Galaxy Tab 3 generation is reportedly on its way, and we’ll have more details about it later this year.
: 2012 Galaxy Tab 2, 2011 Galaxy Tab Plus,
: 2011 Galaxy Tab 7.7
8 to 9 inches
8-inch: 2013 Galaxy Note 8.0
The Galaxy Note 8.0 is the latest addition to Samsung’s line of Galaxy Note tablets, a 8-inch device that’s clearly meant to fight directly against the 7.9-inch iPad. The Galaxy Note 8.0 is already available in some markets, but it’s somewhet criticized by some for its higher-than-expected price – the 16GB Galaxy Note 8.0 Wi-Fi is more expansive than the 16GB iPad mini Wi-Fi.
iPad mini (left) vs Galaxy Note 8.0 (right)
A cellular version of the Galaxy Note 8.0 is also going to be available soon, and, on top of tablet features, it will also offer support for phone calls over 3G.
: 2011 Galaxy Tab 8.9
Update the detailed information about Samsung Galaxy Grand 2 Twrp Recovery V220.127.116.11: Downloads And Guide on the Flu.edu.vn website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!