Trending February 2024 # Clockworkmod Recovery For Galaxy S3 I9300 # Suggested March 2024 # Top 10 Popular

You are reading the article Clockworkmod Recovery For Galaxy S3 I9300 updated in February 2024 on the website Flu.edu.vn. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 Clockworkmod Recovery For Galaxy S3 I9300

Well, we just knew it. Like every time for every Samsung high-end android device, it would be Chainfire who would bring the clockworkmod recovery, also called cwm recovery, first of all. This time, it’s the company’s current flagship device, the Galaxy S3, i9300. And this is an excellent addition to the Galaxy S3 Root we received only some days before, courtesy of none other than Chainfire — you guessed it already, right?

Since it’s the very first recovery, we cannot say it’s fully working and any bug of any sorts cannot be expected. But, to ease your worries, the developer did confirm that he had no troubles taking full rom backups to internal and external sd cards, as also restoring them. Flashing zips from recovery worked just fine too.

The only concern is that, we don’t know yet whether the Galaxy S3 suffers from the same eMMC bug which recent firmwares of Galaxy Note and Galaxy S2 suffer with — it did brick some of these devices, mid you. One can only blame Samsung for that, because it’s tied to firmware Samsung has been releasing. But for what it’s worth, you’ll be happy to hear that Chainfire has patched up the relevant code already, even though that doesn’t result in any guarantee of any sorts.

How to Install Clockworkmod Recovery on Galaxy S3 i9300

If this is the very first time you are using Odin, then do check out this video in which I have used Odin to root and install Chainfire’s cwm recovery on my Galaxy S2. The procedure is exactly same, only files and the phone has changed. The process is one of the easiest things to do on Android hacking scene, but watch the video anyway to get idea of what you are going to do for next 2, 5 or 10 mins (depending on you) or so, which will soon come down to around 30 seconds, once you’ve done it a few times. Yep, it’s that easy, thanks to developer.

Download Clockworkmod Recovery for Galaxy S3, a zip file, from the official development page. See the Attached files section on that page to get download links. Download the latest file by the name: chúng tôi (The filename will of course change based on the latest version available.)

Extract Odin’s zip file to get this file: Odin3 chúng tôi . Run it when asked in step 8 below.

Disconnect your Galaxy S3 if it’s connected to PC, then switch it off.

Now, put the Galaxy S3 in Download Mode — press and hold these keys together: Volume Down + Home + Power. A Warning! screen will come up; press Volume Up key to continue to enter Download Mode.

If you don’t get this “Added! !” message, then probably there is a problem with drivers. Make sure you’ve proper drivers installed (check step 2). Also, uninstall Kies from the Control Panel as well (this will leave the drivers on the computer but remove Kies which can interfere with the procedure).

Important! Now, do not make any other changes in Odin except as asked in step 9 above. Leave all other boxes and everything as they are. And make sure Re-Partition checkbox is not selected. Double check it.

Now, hit the START button to start flashing the clockworkmod recovery on Galaxy S3. When the flashing is complete, your phone will automatically reboot — and when you see the Samsung logo, you can safely unplug the cable. Plus, you’ll get a PASS message (with green background) in the left-most box at the very top of Odin.What to do if Odin gets stuck and doesn’t seem to be flashing anything? It may happen sometimes, but don’t worry. If ODIN gets stuck and doesn’t seem to be doing anything, or if you get a FAIL message (with red background) in ODIN, simply try again: disconnect the phone from the PC, close ODIN, remove battery for 4-5 seconds, re-insert it, turn phone on in Download mode again, and do the procedure again from Step 8.

After the phone boots up, you’ll have Clockworkmod recovery ready for you. Check out the CWM app, or to see it in real, simply boot to recovery mode. For that, power off the Galaxy S3 first, and then press and hold 3 keys together: Volume Up + Home + Power, until you see a Samsung logo. Soon, you’ll be in cwm recovery, from where you take full rom/firmware backups, restore existing backups, flash a zip file (of rom, themes, etc. when available) and do other crazy stuff. (In recovery, use volume keys to navigate up and down and the power button to select items.)

Once you are done, select reboot system now to reboot the phone.

Congratulations, you’ve successfully installed ClockworkMod recovery on your new and lovely Galaxy S3 phone. Enjoy! And don’t forget to say thanks – and donate if you want to – to Chainfire for his very timely incredible work, and support development to.

You're reading Clockworkmod Recovery For Galaxy S3 I9300

Clockworkmod (Cwm) Recovery For Samsung Galaxy Grand Duos

Here is latest version of ClockworkMod Recovery for of Samsung Galaxy Grand Duos which not only brings new features but also fixes the in-compatibility bugs with KitKat ROMs.

You need the CWM recovery to be able to install custom ROMs, which helps you in updating to latest Android version available unofficially, and also get new and cool features for your phone.

As this is the latest version, you shouldn’t be getting that pesky ‘set metadata recursive’ error with this while flashing Android 4.4 base ROMs. This is version 6.0.4.4 of CWM recovery for Galaxy Grand Duos.

WARNING!

Warranty may be void of your device if you follow the procedures given on this page!

You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

CHECK DEVICE MODEL NO.

To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be GT-I9082!

Please know that this page is meant only for Samsung Galaxy Grand Duos, model no. GT-I9082. Please DO NOT try the procedures given here on other of the Galaxy Grand: GT-I9080/I9080L.

BEFORE YOU BEGIN..

You must do this pre-installation stuff before attempting to install CWM on your Galaxy Grand Duos I9082 in order to avoid any complications later, and have a smooth and successful process.

BACK UP YOUR DEVICE

Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on sd card, too.

For help on Backup and Restore, check out our exclusive page on that linked right below.

► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS

INSTALL GALAXY GRAND DUOS DRIVER

You must have proper and working driver installed on your windows computer to be able to successfully flash CWM on your Samsung Galaxy Grand Duos. In case you’re not sure, follow the link below for a definitive guide for installing driver for your Galaxy Grand Duos on your computer.

► SAMSUNG GALAXY GRAND DUOS DRIVERS INSTALLATION GUIDE

CHARGE YOUR DEVICES

If your android device, or PC, powers off due to lack of battery while the process is underway, it could damage the device. So, make sure both of them are adequately charged and that no power interruption takes place when the process is undergoing — at least 50% battery of the device and laptop is what we would recommend.

OTHER THINGS TO TAKE CARE OF:

└ Use original USB cable to connect your phone to PC.

└ Do not use the procedures given below on Mac (using VMWare) as it works best on proper Windows PC only.

EXAMPLE VIDEO

If you haven’t used Odin software to install a recovery on a Samsung galaxy device before, we suggest you first watch a video of that, given right below, to get familiar with the process.

Btw, the video below shows installing the the CWM recovery on Samsung Galaxy S3 (yes, not Grand Duos!), but as the process is exactly same, it doesn’t matter.

GUIDE: SAMSUNG GALAXY GRAND DUOS CWM RECOVERY

DOWNLOADS

Download the files given below and save them in a separate folder on your computer (just to keep things tidy, that is).

Galaxy Grand Duos CWM (Non-touch) with Odin

Galaxy Grand Duos CWM (Touch) with Odin

STEP-BY-STEP GUIDE

Extract/Unzip the CWM file on your computer (using 7-zip free software, preferably). For touch, it is CWM-touch_i9082_chotu.tar and for non-touch, it is recovery_20131210.tar. You’ll get the following files:

Odin3 v3.09.exe

Odin3.ini

recovery_20131210.tar (or) CWM-touch_i9082_chotu.tar

Disconnect the Galaxy Grand Duos from PC if it is connected.

Boot your Galaxy Grand Duos GT-I9082 into Download Mode (image below of Galaxy S4 should help):

Power off your phone first and wait for 6-7 seconds after display is off.

Press and hold these 3 buttons together until you see Warning! screen: Volume Down + Power + Home.

Press Volume Up now to continue to Download Mode.

If you don’t get the Added! message, here are some 

troubleshooting tips

:

Make sure you have installed driver for Galaxy Grand Duos as said above in ‘Before you begin..’ section.

If you have already installed driver, then uninstall them and reinstall back.

Connect using a different USB port on your PC.

Try a different USB cable. The original cable that came with your phone should work best, if not, try any other cable that’s new and of good quality.

Reboot phone and PC and then try again.

Load the recovery file (extracted in Step 1) into Odin as instructed below:

Now in the Option section of Odin, make sure that Re-Partition box is unchecked. (Auto Reboot and F. Reset Time boxes remain checked, while all other boxes remain unchecked.)

Double check the above two steps.

If you see FAIL message instead of the RESET in Odin’s top left box, that a problem. Try this now: disconnect your Galaxy Grand Duos from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.

Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your Galaxy Grand Duos from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.

FEEDBACK US!

It was easy, right? Let us know what you plan to do now, with latest cwm recovery installed.

Looking to install Android 4.4 KitKat maybe, eh?

Suggestions are most welcomed!

Twrp Recovery For Galaxy S Plus I9001

TWRP recovery is a blessed paradise for those who often deal with install custom ROMs on their devices using ClockworkMod recovery with the volume buttons (which is quite cumbersome), and is now available for the Samsung Galaxy S Plus I9001, thanks to XDA Senior Member dbx4.

TWRP recovery has a full touch interface and has a lot of unique features, some of which are mentioned below:

Graphical touchscreen interface with buttons and drag-to-scroll!

Compressed backups that can save you up to 50% disk space

Ability to choose which partitions to back up and which to restore

Install queues allow you to install multiple zips in one go (e.g. CM9 zip together with gapps zip)

Easy one-button cache & dalvik cache clearing after an installation

Recovery settings are saved to the sdcard and persist through reboots

File Manager that allows you to move, copy and delete files and change their permissions

Battery percentage indicator and clock (set your timezone in settings!)

TWRP recovery really is a must-have, specially for ROM flashing addicts as it makes the time spent in recovery mode much more intuitive. Read on to find out how to flash TWRP Recovery on the Galaxy S Plus I9001.

Compatibility

This recovery and the guide below are compatible only and only with the Samsung Galaxy S PLUS, model number i9001. It’s not compatible the GT-i9003, I9000 or with any other device and may render an incompatible device unusable. Check your device model in Settings » About phone.

Warning!

The methods and procedures discussed here are considered risky and you should not attempt anything if you don’t know exactly what you are doing. If any damage occurs to your device, we won’t be held liable.

How to Install TWRP Recovery on Galaxy S Plus

Download Drivers

Download the latest TWRP Recovery file from the official XDA page. Download the flashable image file version to get a .img file.

Extract the i9001_Quick_Flasher_v1.4.rar to a convenient location on your computer. Use a software like WinRAR or 7-zip to extract.

On the phone, enable USB Debugging from Settings » Applications » Development. Then, connect your phone to the computer.

After the phone reboots, TWRP recovery will be successfully installed on your Galaxy S Plus.

To try out TWRP recovery, first turn off the phone. Then, press and hold the Volume Up + Power buttons together, and let go of the buttons as soon as the Samsung logo shows up. Then, as soon as an icon showing “an Android in a box” comes up, press the Menu button (the button on the left of the center/home button) to enter recovery.

What to do if phone keeps booting into recovery after flashing

After flashing TWRP recovery, your phone might start booting into recovery every time you try to turn on the phone. If that happens with you, you can follow the steps below to solve the problem. If your phone boots up fine after flashing TWRP recovery, you DO NOT need to do this part.

Download the following files:

Boot_loader.tar  (Do not extract this even if it shows up as a compressed/zip file)

Odin v4.43.exe

Turn off your phone completely. Then, turn on the Galaxy S Plus in Download Mode — press and hold these keys together: Volume Down + Home + Power until a screen with an Android icon in yellow comes up. 

In ODIN, do the following:

Now, connect the phone to the computer using your USB cable. You should get the message “Added!!” under Odin’s message box in the bottom left. If you don’t get this message, then probably there is a problem with drivers. Make sure you have proper drivers installed (check step 1 of the flashing procedure).

What to do if Odin gets stuck: If ODIN gets stuck at some stage and doesn’t seem to be doing anything, do this — disconnect the phone from the PC, close ODIN, remove battery, re-insert it, turn phone on in Download mode again, and do the procedure again from Step 7. Same if you get a FAIL message in Odin.

Your phone will no longer keep rebooting into recovery whenever you try to turn it on.

Root Samsung Galaxy S3 Metropcs Sch

  WARNING!

Warranty may be void of your device if you follow the procedures given on this page.

You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

  GUIDE: ROOT SAMSUNG GALAXY S3 METROPCS SCH-R530M

Before you begin with the instructions below, make sure your android device is adequately charged — at least 50% battery of the device.

  STEP 0: CHECK DEVICE MODEL NO.

Please know that this page is meant only for Samsung Galaxy S3 MetroPCS. Please DO NOT try the procedures given here on any other device of Samsung or any other company. You have been Warned!

  STEP 1: BACKUP YOUR DEVICE

Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.

For help on Backup and Restore, check out our exclusive page on that linked right below.

► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS

  STEP 2: INSTALL LATEST DRIVER

You must have proper and working driver installed on your windows computer to be able to successfully root your Samsung Galaxy S3 MetroPCS.

In case you’re not sure, follow the link below for a definitive guide for installing driver for your Samsung device on your computer.

► SAMSUNG DEVICES DRIVERS INSTALLATION GUIDE

   STEP 3: INSTALLATION INSTRUCTIONS

  DOWNLOADS

Download the Debugfs Automated Root file given below and transfer it to a separate folder on your computer (just to keep things tidy, that is).

  DEBUGFS AUTOMATED ROOT FILE

For latest version of this tool, check the original page →

  STEP-BY-STEP GUIDE

Important Note: Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to do a factory reset after using the Debugfs Root Tool, which might delete internal sd card too, your files will remain safe on PC.

Extract/Unzip the root package, DebugfsRoot_Generic_v2.3.zip on your computer (using 7-zip free software, preferably). You’ll get the following files:

adb.exe

AdbWinApi.dll

AdbWinUsbApi.dll

debugfs

debugfsinput

isroot

RootDebugfs.bat

su

Superuser.apk

Enable app installation from Unknown sources. For this:

Go to your device’ Settings » Security » Scroll to the bottom and tick on Unknown Sources to allow installation of non-market apps.

Turn on USB Debugging  on your Galaxy S3

Enable developer options: Go to your device’ Settings » select About device » Scroll to the bottom and tap on “Build number” seven times to enable developer options.

Enable USB Debugging: Open device’ Settings » select Developer options » Tick the “USB debugging” checkbox. (under Debugging section)

Press 1 on the command window to root your device. It will display some instructions which we already covered, so just press any key to move forward.

If the device is not detected for a longer time, here are some troubleshooting tips:

Make sure you have installed driver for Galaxy S3 as said above in ‘Before you begin..’ section.

If you have already installed driver, then uninstall them and reinstall back.

Connect using a different USB port on your PC.

Try a different USB cable. The original cable that came with your phone should work best, if not, try any other cable that’s new and of good quality.

Reboot your phone and PC and then try again.

Now if there isn’t a hassle with the phone’s connection with PC, your device will be rooted in a few minutes.

NOTE: In the process of rooting the phone will reboot several times before the phone is completely rooted. It is supposed to reboot a few times, So don’t disconnect your device from PC until the process is finished.

FEEDBACK US!

It was easy to root your Galaxy S3 SCH-R530M with Debugfs Automated Root Tool, right?  Let us know how you plan to use root privileges on your Galaxy S3 MetroPCS.

Your suggestions and queries, if any, are most welcomed!

Motorola Moto G Clockworkmod (Cwm) Recovery: Downloads And Guide

With, Moto G getting an official unlocking of bootloader and sources open to everyone, it was only a matter of time before it got the famed ClockworkMod Recovery. And here it is. Even at it’s early stage, it is fully functional with only bug left being incorrect date showing in backup file names. But that’s not much of a bug, right?

All credits for the original recovery file goes to a1Pha, the developer who compiled CWM Recovery for Moto G.

At the moment of writing this post, the latest version of CWM is 6.0.4.5 for the Moto G.

WARNING!

Warranty may be void of your device if you follow the procedures given on this page.

You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

CHECK DEVICE MODEL NO.

To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be XT1033/XT1032! 

This procedure here will work for both single-sim and dual-sim variants. Do not use the procedures discussed here on any device of Motorola or any other company. You have been warned!

BEFORE YOU BEGIN..

You must do this pre-installation stuff before attempting to install CWM recovery on your Moto G in order to avoid any complications later, and have a smooth and successful process.

UNLOCK BOOTLOADER of MOTO G FIRST!

In order to install CWM recovery on Moto G, you need to unlock its bootloader first. If you have already done that, then skip this, otherwise follow the link below to see our guide on that. Tip: As unlocking the bootloader will delete everything on your phone — apps, files, etc. — be sure to create Backup of all things necessary before starting with bootloader unlock guide.

► MOTOROLA MOTO G BOOTLOADER UNLOCK GUIDE

BACK UP YOUR DEVICE

Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.

For help on Backup and Restore, check out our exclusive page on that linked right below.

► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS

INSTALL MOTOROLA DEVICE MANAGER

You must have proper and working driver installed on your windows computer to be able to install recovery on your Motorola Moto G. In case you are not sure follow the instructions below.

►  ADB AND FASTBOOT DRIVERS FOR MOTOROLA PHONES AND TABLETS

CHARGE YOUR DEVICE

If your android device powers off due to lack of battery while the process is underway, it could damage the device.

So, make sure your device is adequately charged — at least 50% battery of the device.

GUIDE: MOTOROLA MOTO G CWM RECOVERY

DOWNLOADS

CLOCKWORK MOD RECOVERY FILE

STEP-BY-STEP GUIDE

Prepare your phone:

Enable developer options: Go to your phone’s Settings » select About phone » Scroll to the bottom and tap on “Build number” seven times to enable developer options.

Enable USB Debugging: Open phone’s Settings » select Developer options » Tick the “USB debugging” checkbox (under Debugging section).

Extract the installer file motorola-moto-g-cwm.zip (using 7-zip, preferably). You’ll get the following files, and one folder:

api (folder)

adb.exe

AdbWinApi.dll

AdbWinUsbApi.dll

fastboot.exe

moto-g-CWM-recovery.img

source.properties

That’s all! You have successfully flashed ClockworkMod Recovery on your Motorola Moto G.

If you are looking to root your Moto G, then we’ve two different Root methods ready for you. Try the superboot method first as it’s the easiest, and modified recovery method shall be your last resort to root as it tweaks the recovery in order to gain superuser access.

► ROOT MOTO G WITH ONE CLICK SUPERBOOT ROOT TOOL

► ROOT MOTO G WITH MODIFIED RECOVERY METHOD

FEEDBACK US!

It was easy to install CWM recovery your Motorola Moto G, right? Let us know and how you plan to use it further.

Your suggestions and queries, if any, are most welcomed.

Via XDA (a1Pha)

Update Galaxy S3 Lte To Android 4.4 Kitkat

Users of Galaxy S3 LTE can now enjoy the taste of KitKat Google presented with Android 4.4. It’s the unofficial CyanogenMod 11 ROM that brings the KitKat update on Galaxy S3 LTE.

As regards official KitKat update for the Galaxy S3 LTE from Samsung, well, chances are more than not that it will never happen, as S3 is already past the update chart.

CM11 presents a brilliant option for Galaxy S3 LTE users to try the KitKat update, and even though it’s in not complete, and remains in development, it’s still good for try — to taste the KitKat.

Let’s see how to install the custom Android 4.4 KitKat update using CM11 on your Galaxy S3 LTE.

WARNING!

Warranty may be void of your device if you follow the procedures given on this page.

You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

CHECK DEVICE MODEL NO.

Do not use the procedures discussed here on any other Galaxy S3 (including the S3 devices, T-Mobile, Sprint and international ones) or any other device of Samsung or any other company. You have been warned!

BEFORE YOU BEGIN..

You must do this pre-installation stuff before attempting to install the ROM on your Samsung Galaxy S3 GT-I9305 in order to avoid any complications later, and have a smooth and successful process.

BACK UP YOUR DEVICE

Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.

For help on Backup and Restore, check out our exclusive page on that linked right below.

► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS

CHARGE YOUR DEVICE

If your android device powers off due to lack of battery while the process is underway, it could damage the device.

So, make sure your device is adequately charged — at least 50% battery of the device.

EXAMPLE VIDEO

If you haven’t used a custom recovery, either CWM or TWRP, before, to install a .zip file of a ROM on anything else, then we suggest you first watch a video of that, given right below, to get familiar with the process.

GALAXY S3 LTE GT-I9305  ANDROID 4.4 KITKAT ROM

DOWNLOADS

Download the files given below and transfer them to a separate folder on your phone and remember the location.

GAPPS FILE ROM FILE

For latest version of the ROM, check the original page →.

Reminder: Before you proceed, make sure you’ve transferred the files you downloaded above to a separate folder on your Galaxy S3 LTE.

STEP-BY-STEP GUIDE

Make sure you have backed up your phone adequately (including important data stored on internal memory).

You will need the CWM recovery given below to be able to install Android 4.4 ROM. It’s the .IMG file of the CWM. Install it and then use the guide below to install the Android 4.4 ROM, CM11.

Link to CWM Recovery (for Android 4.4 CM11 ROM)

GUIDE FOR CLOCKWORKMOD RECOVERY (CWM) USERS

Boot into recovery mode. For this:

Power off your device and wait for 5-10 seconds until the device is fully switched off.

└ In Recovery mode, use Volume buttons to navigate Up and Down between options and use Power button to select an option.

Create a Nandroid Backup from recovery. It’s optional but very important to do, so that in case something goes wrong you can restore to current status easily. For making a Nandroid Backup, go to Backup And Restore » Backup.

Perform a Factory Reset (This will delete all apps and their settings and game progress). For this:

Select Wipe data/Factory reset, then select Yes on the next screen to confirm factory reset (screenshot)

Install the ROM file first (CM11-1.1-11-12-13-UNOFFICIAL-jfltevzw.zip). For this:

└ Make sure to first flash the ROM file and then the Gapps file.

Now, do a factory reset as you did in step 3.

Reboot your device. For this, go back to the main menu of recovery and select reboot system now.

Note: In case your device gets bootloop (stuck at logo while rebooting), just do a factory reset (step 3) and you will be fine.

That’s all. Your phone will now reboot and it will take some time as it’ll be phone’s first boot after installing Android 4.4, be extremely excited for this!

Feedback Us!

It was easy to install Android 4.4 KitKat, right? Let us know how it tastes to you.

Your suggestions and queries, if any, are most welcomed!

Update the detailed information about Clockworkmod Recovery For Galaxy S3 I9300 on the Flu.edu.vn website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!